Table of Contents
Advertisement
360 Maintaining and managing the system
/cfg/scheduler/add
followed by:
month(s)
day(s)
hour(s)
minute(s)
comments
protocol
hostname or IP address
filename
password
/cfg/scheduler/add
followed by:
starttrace
day of week
month(s)
day(s)
hour(s)
minute(s)
comments
Copyright © 2007, 2008 Nortel Networks
.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Select the month. You can select the
multiple months. The value ranges from 1
to 12.
Select the day of the month. You can
select the multiple days of a month. The
value ranges from 1 to 31.
Specify the hour. The value ranges from 0
to 23.
Specify the minute. The value ranges from
0 to 59.
Specify comment for this scheduler task.
Select the protocol. Values: tftp and ftp.
Specify the hostname or IP address of
server.
Specify the filename.
Password for private keys in cfg.
Select the day of the week. You can
select the multiple days in a week.The
value ranges from 0 to 6. (Sunday = 0)
and [*]: 1-5
Select the month. You can select the
multiple months. The value ranges from
1 to 12. Every Month (*)
Select the day of the month. You can
select the multiple days of a month. The
value ranges from 1 to 31. Every Day (*)
Specify the hour. The value ranges from
0 to 23.
Specify the minute. The value ranges
from 0 to 59.
Specify comment for this scheduler.
Advertisement
Table of Contents
