Nortel Secure Network Access Switch; Using The Command Line Interface - Nortel 325 series Cli Manual

Step
1
2
3
4
5
6
7
Copyright © 2007, 2008 Nortel Networks
.
Action
Access the Certificate menu by using the /cfg/cert <cert
id> command, where <cert id> is the certificate number of
the certificate you wish to copy.
To view basic information about all configured certificates, use
the /info/certs command.
Display the private key and certificate. Enter the following
command:
/cfg/cert #/display
When prompted, specify whether or not the key will be
encrypted. The default is yes.
When prompted, specify a password phrase if you wish to
password protect the private key. The password phrase must
contain at least four characters.
If you specify a password phrase, the password phrase must be
provided on all occasions in future when the private key file is
accessed (for example, when adding, importing, or exporting
private keys and certificates).
Copy the private key, certificate, or both, as required.
For the private key, ensure that you include the -----BEGIN
RSA PRIVATE KEY----- and -----END RSA PRIVATE
KEY----- lines.
For the certificate, ensure that you include the -----BEGIN
CERTIFICATE----- and -----END CERTIFICATE-----
lines.
Paste the private key, certificate, or both into a text editor.
Save the file with a .PEM extension.
Figure 19 "Displaying a private key and certificate" (page
318) shows sample output for the /cfg/cert #/display
command. For more information about the Certificate menu
commands, see "Managing and viewing certificates and keys"
(page 302).

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100 03.01 Standard
28 July 2008
Managing private keys and certificates 317