Table of Contents
Advertisement
400 Configuration example
>> Main# cfg/doamin #/switch 1
Creating Switch 1
Enter name of the switch: Switch1_ERS8300
Enter the type of the switch (ERS8300/ERS5500): ERS8300
Enter IP address of the switch: 10.200.200.5
NSNA communication port[5000]:
Enter VLAN Id of the Red VLAN: 110
Entering: SSH Key menu
Enter username: rwa
Leaving: SSH Key menu
-------------------------------------------------------
-----
[Switch 1 Menu]
Error: Failed to retrieve host key
>> Switch 1# apply
Changes applied successfully.
Export the Nortel SNAS public SSH key to the Ethernet Routing Switch
8300:
>> Switch 1# sshkey/export
Import the public SSH key from the switch:
>> SSH Key# import
Adding the Ethernet Routing Switch 5510 Use the quick switch wizard:
>> Main# cfg/doamin #/quick
Enter the type of the switch (ERS8300/ERS5500) [ERS8300]:
ERS55
IP address of Switch: 10.200.200.20
NSNA communication port[5000]:
Copyright © 2007, 2008 Nortel Networks
.
name
- Set Switch name
type
- Set Type of the switch
ip
- Set IP address
port
- Set NSNA communication port
hlthchk - Health check intervals for switch
vlan
- Vlan menu
rvid
- Set Red VLAN Id
sshkey - SSH Key menu
reset
- Reset all the ports on a switch
ena
- Enable switch
dis
- Disable switch
delete
- Remove Switch
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Advertisement
Table of Contents
