Table of Contents
Advertisement
.
Managing certificates
This chapter includes the following topics:
Topic
"Overview" (page 297)
"Managing private keys and certificates" (page 301)
Overview
To use the encryption capabilities of the Nortel SNAS, you must add a key
and certificate that conforms to the X.509 standard.
The key and certificate apply to the cluster. It does not matter whether
you connect to the Management IP address (MIP) or Real IP address
(RIP) of a Nortel SNAS device in order to manage Secure Socket Layer
(SSL) certificates. When you add a key and certificate to one Nortel SNAS
device in the cluster, the information is automatically propagated to all
other devices in the cluster.
Copyright © 2007, 2008 Nortel Networks
.
"Key and certificate formats" (page 298)
"Creating certificates" (page 299)
"Installing certificates and keys" (page 299)
"Saving or exporting certificates and keys" (page 300)
"Updating certificates" (page 300)
"Roadmap of certificate management commands" (page 301)
"Managing and viewing certificates and keys" (page 302)
"Generating and submitting a CSR" (page 305)
"Adding a certificate to the Nortel SNAS " (page 310)
"Adding a private key to the Nortel SNAS " (page 312)
"Importing certificates and keys into the Nortel SNAS " (page 314)
"Displaying or saving a certificate and key" (page 316)
"Exporting a certificate and key from the Nortel SNAS " (page 318)
"Generating a test certificate" (page 320)
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
297
Advertisement
Table of Contents
