Nortel Secure Network Access Switch; Using The Command Line Interface - Nortel 325 series Cli Manual

210 Configuring authentication
To view the currently configured authentication methods and their
corresponding authentication IDs, use the /cfg/doamin #/aaa/cur
command.
For example: You have configured Local database authentication
under auth ID 1, RADIUS authentication under auth ID 2, and LDAP
authentication under auth ID 3. You want the Nortel SNAS to check
the local database first, then send requests to the LDAP server, then to
the RADIUS server.
210)
Figure 13
Authentication order command
Copyright © 2007, 2008 Nortel Networks
.
Figure 13 "Authentication order command" (page
shows the required command.

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100 03.01 Standard
28 July 2008