Nortel Secure Network Access Switch; Using The Command Line Interface - Nortel 325 series Cli Manual

460 Syslog messages
Table 81
Traffic Processing messages—WARNING (cont'd.)
Message
License expired
Server <id> uses default interface
(interface <n> not configured)
IPSEC server <id> uses default
interface (interface <n> not
configured)
Table 82 "Traffic Processing messages—INFO" (page 460)
Processing INFO messages.
Table 82
Traffic Processing messages—INFO
Message
gzip error: <reason>
gzip warning: <reason>
accept() turned off (<nr>) too many
fds
No cert supplied by backend server
No CN supplied in server cert
<subject>
Bad CN supplied in server cert
<subject>
DNS alarm: dns server(s) are UP
Copyright © 2007, 2008 Nortel Networks
.
Category
WARNING
WARNING
WARNING
Category
INFO
INFO
INFO
INFO
INFO
INFO
INFO

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100 03.01 Standard
28 July 2008
Explanation/Action
The loaded (demo) license on the
Nortel SNAS has expired. The Nortel
SNAS now uses the default license.
A specific interface is configured to be
used by the server but this interface is
not configured on the Nortel SNAS.
A specific interface is configured to
be used by the IPsec server but this
interface is not configured on the
Nortel SNAS.
Explanation/Action
Problem encountered when
processing compressed content.
Problem encountered when
processing compressed content.
The Nortel SNAS has temporarily
stopped accepting new connections.
This happens when the Nortel SNAS
is overloaded. The Nortel SNAS will
start accepting connections once it
has finished processing its current
sessions.
No certificate supplied by backend
server when doing SSL connect.
Session terminated to backend
server.
No CN found in the subject of the
certificate supplied by the backend
server.
Malformed CN found in subject of the
certificate supplied by the backend
server.
At least one DNS server is now up.
lists the Traffic