Table of Contents
Advertisement
Installation preparation
This section provides basic information about the Nortel Secure Network
Access Switch (NSNA) 4070 and the checklist of the shipped accessories.
Navigation
•
•
Safety precautions
This section describes the safety precautions, which are vital for handling
and installation of the NSNA.
Safety precautions navigation
•
•
•
Personal safety before installing the device
For your safety, review the following personal safety warnings before
working with the NSNA.
•
•
Module safety
Use the following general practices to prevent the equipment damage when
working with the NSNA.
•
Copyright © 2008, Nortel Networks
.
"Safety precautions" (page 21)
"Installation checklist" (page 23)
"Personal safety before installing the device" (page 21)
"Module safety" (page 21)
"Cable and connector safety" (page 22)
Two or more people must be involved in installing the device.
Use the following safe practices for lifting:
— Items between 18 and 32 kilograms (39.7 and 70.5 pounds) should
be lifted by a minimum of two people.
The device must be installed in a room where the ambient temperature
is at or below 35 degrees Celsius (95 degrees Fahrenheit).
Nortel Secure Network Access
Installation — Quick Start Switch 4070
NN47230-303 01.01 Standard
2.0 28 July 2008
21
Advertisement
Table of Contents
