Nortel Secure Network Access Switch; Using The Command Line Interface - Nortel 325 series Cli Manual

/cfg/sys/adm/snmp/event
followed by:
addmonitor [ <options>
] -x <name> <OID>
[present|absent| changed]
delmonitor <name>
addevent [-c <comment> ]
<name> <notification> [
<OID...> ]
Copyright © 2007, 2008 Nortel Networks
.

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100 03.01 Standard
28 July 2008
Configuring SNMP 335
Adds an existence monitor and trigger as
defined in the DISMAN-EVENT-MIB.
Valid <options> are:
•
-c <comment>—adds a comment
•
-f <frequency>—the sampling
interval, in seconds. The default is 600
(10 minutes).
•
-o <OID>—additional objects to send
in the event
•
-e <EventName>—the name of a
notification event
•
-d <OID>—the delta discontinuity OID
•
-D timeTicks|timeStamp|dateAnd
Time—the delta discontinuity type
Other parameters are:
•
name—a unique name you assign to
the monitor, for identification
•
OID—the object identifier (or symbolic
name) to monitor
•
present|absent|changed—indicate
s whether the object being monitored is
present, absent, or has changed
Removes the specified monitor from the
configuration.
Adds a notification event as defined in the
DISMAN-EVENT-MIB.
•
-c <comment>—adds a comment
(optional)
•
name—a unique name you assign to
the event, for identification
•
notification—the OID (or symbolic
name) of the notification
•
OID...—additional notification OIDs
(optional)