Table of Contents
Advertisement
166 Configuring groups and profiles
Figure 7
Extended Profile menu commands
Creating RADIUS attributes to a group
To create a RADIUS Attribute to a group, access the Group RADIUS
Attributes menu from the Group menu. Use the following command:
/cfg/doamin #/aaa/group #/radattr
The Group RADIUS Attributes menu appears.
The Group RADIUS Attributes menu includes the following options:
Table 29
Configure RADIUS Attributes
/cfg/doamin #/aaa/group #/radattr
followed by:
list <vendor> <id>
<value>
del <index>
add <vendor> <id>
<value>
Copyright © 2007, 2008 Nortel Networks
.
Lists the currently configured RADIUS attributes by
index number.
Removes the RADIUS attribute entry represented
by the specified index number. The index numbers
of the remaining entries adjust accordingly.
Adds a RADIUS attribute to the group. You can
add as many RADIUS attributes as you want.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Advertisement
Table of Contents
