Nortel Secure Network Access Switch; Using The Command Line Interface - Nortel 325 series Cli Manual

480 Supported MIBs
Table 89
Supported MIBs (cont'd.)
MIB
IP-FORWARD-MIB
IP-MIB
NORTEL-SECURE-ACCESS-SWITC
H-MIB
SNMP-FRAMEWORK-MIB
SNMP-MPD-MIB
SNMP-NOTIFICATION-MIB
SNMP-TARGET-MIB
Copyright © 2007, 2008 Nortel Networks
.
Description
•
ifInUnknownProtos
•
ifOutNUnicast
The following group is implemented:
•
ipCidrRouteGroup
The following groups are implemented:
•
ipGroup
•
icmpGroup
Contains objects for monitoring the Nortel SNAS devices.
The following groups are implemented:
•
snasBasicGroup
•
snasEventGroup
The following group is implemented:
•
snmpEngineGroup
The following group is implemented:
•
snmpMPDGroup
The following group is implemented:
•
snmpNotifyGroup
Write access to all objects in this MIB is turned off in
VACM.
The SNMP-TARGET-MIB contains information
about where to send traps. You can configure
and view trap information from the CLI, using the
/cfg/sys/adm/snmp/target command (see
"Configuring SNMP notification targets" (page
The following groups are implemented:
•
snmpTargetCommandResponderGroup
•
snmpTargetBasicGroup
•
snmpTargetResponseGroup
Write access to snmpTargetParamsTable is turned off in
VACM.

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100 03.01 Standard
28 July 2008
331)).