Table of Contents
Advertisement
6
7
Configuring the Call Server Information and VLAN Information options
For the Auto VLAN Discovery feature, you must configure the options for
both the data (or boot) VLAN and the Phone VLAN. Configure the option
for the data (or boot) VLAN first, then repeat the steps to configure the
option for the Phone VLAN.
To configure the options, perform the following steps.
Step
1
2
Copyright © 2007, 2008 Nortel Networks
.
b Click OK.
Create the DHCP option for the auto-discovery of VLAN ID
information:
a In the Predefined Options and Values dialog box, click Add.
The Option Type dialog box opens (see
Option Type dialog box" (page
b In the Option Type dialog box, enter the required information
(see
Table 93 "Option Type dialog box field values for VLAN
Information" (page
Table 93
Option Type dialog box field values for VLAN Information
Field
Name
Data type
Code
Description
c Click OK.
In the Predefined Options and Values dialog box, click OK, to
return to the DCHP Management Console.
Action
In the DHCP Management Console, expand the required VLAN:
•
first, the data (or boot) VLAN used with the IP Phone
•
when you repeat the steps, the Phone VLAN
Right-click Scope Options, and select Configure Options.
The Scope Options dialog box (see
Options dialog box" (page
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Configuring IP Phone auto-configuration 497
496)).
497)).
Value
VLAN Information
String
191
Comments (Optional)
--End--
Figure 36 "The Scope
498)).
Figure 35 "The
Advertisement
Table of Contents
