Nortel Secure Network Access Switch; Using The Command Line Interface - Nortel 325 series Cli Manual

Table 37
Configuring LDAP settings (cont'd.)
/cfg/doamin #/aaa/auth #/ldap
followed by:
isdbinddn <DN>
isdbindpas <password>
ldapmacro
enaldaps true|false
Copyright © 2007, 2008 Nortel Networks
.
Specifies an entry in the LDAP server used
to authenticate the Nortel SNAS to the LDAP
server, so that the LDAP DIT can be searched.
The isdBindDN corresponds to an entry
created in the Schema Admins account (for
example, cn=ldap ldap, cn=Users,
dc=example, dc=com).
Required for searchbase and userattr
method 2.
Specifies the password used to authenticate
the Nortel SNAS to the LDAP server. The
isdbindpas is the password, configured in
the Schema Admins account, for the entry
referenced in isdBindDN.
Required for searchbase and userattr
method 2.
Accesses the LDAP Macro menu, in order
to manage macros (see
macros" (page
If true, makes LDAP requests between the
Nortel SNAS and the LDAP server occur over
a secure SSL connection (LDAPS). The default
is false. Retain the default value or reset to
false.
ATTENTION
The default TCP port number used by the
LDAP protocol is 389. If LDAPS is enabled,
change the port number to 636.

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100 03.01 Standard
28 July 2008
Configuring authentication 191
login name is bill. If the user attribute
is defined as sAMAccountName, the user
record for Bill Smith will be found.
The isdbinddn and isdbindpas
parameters are required so that the Nortel
SNAS can authenticate itself to the LDAP
server, in order to search the DIT.
"Managing LDAP
195)).