System Control Process Messages; Nortel Secure Network Access Switch; Using The Command Line Interface - Nortel 325 series Cli Manual

Table 74
Operating system messages—ERROR
Message
Config filesystem corrupt
Missing files in config filesystem
Logs filesystem re-initialized
Root filesystem repaired -
rebooting
Config filesystem restored from
backup
Rebooting to revert to permanent
OS version

System Control Process messages

There are three categories of System Control Process messages:
•
•
•
Events and alarms are stored in the event log file. You can access the
event log file by using the /info/events/download command. You
can view active alarms by using the /info/events/alarms command.
For more information, see
statistics" (page
Copyright © 2007, 2008 Nortel Networks
.
Category
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
INFO (see Table 75 "System control process messages—INFO" (page
454))
ALARM (see Table 77 "System Control Process messages—ALARM"
(page 455))
EVENT (see Table 78 "System Control Process messages—EVENT"
(page 456))
337).

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100 03.01 Standard
28 July 2008
Syslog messages by message type 453
Explanation/Action
Possible loss of configuration. Followed by the
message:
Config filesystem re-initialized -
reinstall required
or
Config filesystem restored from
backup.
Possible loss of configuration. Followed by the
message:
Config filesystem re-initialized -
reinstall required
or
Config filesystem restored from
backup.
Loss of logs.
fsck found and fixed errors. Probably OK.
Loss of recent configuration changes.
Happens after Config filesystem
re-initialized - reinstall required
or Config filesystem restored from
backup if software upgrade is in progress (in
other words, if failure at first boot on new OS
version).
"Viewing system information and performance