Nortel Secure Network Access Switch; Using The Command Line Interface - Nortel 325 series Cli Manual

When the user session terminates, the Nortel SNAS sends an accounting
request stop packet to the accounting server. The stop packet contains the
following information:
•
•
•
Configure the RADIUS server in accordance with the recommendations in
RFC 2866.
Certain Nortel SNAS -specific attributes are sent to the RADIUS server
when you enable accounting (see
attributes" (page
these attributes can be used for more detailed monitoring of Nortel SNAS
activity.
When you add an external RADIUS accounting server to the configuration,
the server is automatically assigned an index number. Nortel SNAS
accounting will be performed by an available server with the lowest index
number. You can control accounting server usage by reassigning index
numbers (see
To configure the Nortel SNAS to support RADIUS accounting, use the
following command:
/cfg/domain #/aaa/radacct
The Radius Accounting menu appears.
The Radius Accounting menu includes the following options:
Table 13
Configuring RADIUS accounting
/cfg/domain #/aaa/radacct
followed by:
servers
domainattr
Copyright © 2007, 2008 Nortel Networks
.
session ID
session time
cause of termination
114)). In conjunction with custom plugins on RADIUS,
"Managing RADIUS accounting servers" (page

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100 03.01 Standard
28 July 2008
Configuring the domain 111
"Configuring Nortel SNAS -specific
Accesses the Radius Accounting Servers
menu, in order to configure external RADIUS
accounting servers for the domain (see
"Managing RADIUS accounting servers" (page
112)).
Accesses the Domain Attribute menu, in
order to configure Nortel SNAS -specific
attributes to be sent to the accounting server
(see "Configuring Nortel SNAS -specific
attributes" (page 114)).
112)).