Nortel Secure Network Access Switch; Using The Command Line Interface - Nortel 325 series Cli Manual

440 CLI reference
Command
/cfg/domain #/switch <switch ID>
/cfg/domain #/switch #/dis
/cfg/domain #/switch #/ena
/cfg/domain #/switch #/hlthchk
/cfg/domain #/switch #/sshkey
Copyright © 2007, 2008 Nortel Networks
.
Parameters/Submenus
name <name>
ip <IPaddr>
mgmtproto <sscp|sscplit
e>
type ERS8300|ERS5500|ER
S4500
port <port>
hlthchk
vlan
rvid <VLAN ID>
sshkey
ena
dis
delete
interval <seconds>
deadcnt <count>
sq-int <seconds>
import
add
del
show
export
user <user>

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100 03.01 Standard
28 July 2008
Purpose
Configure the
network access
devices on the
domain.
Stop communica
tion between the
Nortel SNAS and
a network access
devices.
Restart communic
ation between the
Nortel SNAS and
a network access
devices.
Configure the
interval and dead
count parameters
for the Nortel SNAS
health checks and
status-quo mode.
Retrieve the public
key for the network
access devices and
export the public
key for the domain.