Table of Contents
Advertisement
.
Configuration example
This chapter provides an example of a basic Nortel SNAS configuration.
This chapter includes the following topics:
Topic
"Scenario" (page 385)
"Steps" (page 387)
Scenario
The basic Nortel SNAS network in this example includes: one Nortel
SNAS device; two edge switches (one Ethernet Routing Switch 8300and
one Ethernet Routing Switch 5510) functioning as network access devices
; an Ethernet Routing Switch 8600 functions only as the core router. BCM
call server; a DNS server; a DHCP server; and a remediation server are
connected to it. The edge switches function in Layer 2 mode.
Figure 23 "Basic configuration" (page 386)
configuration.
Copyright © 2007, 2008 Nortel Networks
.
"Configure the network DNS server" (page 388)
"Configure the network DHCP server" (page 388)
"Configure the network core router" (page 392)
"Configure the Ethernet Routing Switch 8300" (page 393)
"Configure the Ethernet Routing Switch 5510" (page 395)
"Configure the Nortel SNAS " (page 397)
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
illustrates the network
385
Advertisement
Table of Contents
