/cfg/domain/radius/eapmethods
followed by:
del <index number>
add <method type>
<module name>
insert <index number>
<method type> <module
name>
move <index number>
<destination index>
Select the server certificate
Select the server certificate from the list, use the following command:
/cfg/domain/radius/cert
Copyright © 2007, 2008 Nortel Networks
.
Removes the specified EAP method from the
current configuration. The index numbers of
the remaining entries adjust accordingly.
•
Adds a EAP method to the configuration.
•
•
Inserts a EAP method at a particular position
in the list.
•
•
•
Moves a EAP Method up or down the list .
•
•
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Select the server certificate
index number—is the identification
number automatically assigned to the EAP
method, when you added the EAPmethod
to the configuration.
method type—Specify the method type.
module name—is a string that must be
unique. The maximum allowable length
of the string is 255 characters, but Nortel
recommends a maximum of 32 characters.
Specify the module name.
index number—is the identification
number automatically assigned to the EAP
method,when you added the method to the
configuration. Specify the index number.
method type—Specify the method type.
method name—is a string that must be
unique in the domain. The maximum
allowable length of the string is 255
characters, but Nortel recommends a
maximum of 32 characters. Specify the
module name.
index number—the original index number
of the EAP Methods.
destination index—the index number
representing the new position of the EAP
method in the lists.
137