Nortel Secure Network Access Switch; Using The Command Line Interface - Nortel 325 series Cli Manual

88 Configuring the domain
Creating Domain 1
Creating Certificate 1
Creating Client Filter 1
Name: nha_passed
Creating Client Filter 2
Name: nha_failed
Creating Client Filter 3
Name: nha_system_passed
Creating Client Filter 4
Name: nha_system_failed
Creating Linkset 1
Name: nha_passed
This Linkset just prints the Health Agent result
Creating Linkset 2
Name: nha_failed
This Linkset just prints the Health Agent result
Creating Linkset 3
Name: nha_system_passed
This Linkset just prints the Health Agent result
Creating Linkset 4
Name: nha_system_failed
This Linkset just prints the Health Agent result
Creating Group 1
Name: nhauser
Creating Extended Profile 1
Giving full access when health check passed
Creating "green" vlan with id 110
Creating Access rule 1
Giving remediation access when health check failed
Creating Extended Profile 2
Not using SRS rule for user compliancy:
Creating Authentication 1
Adding user 'nha' with password 'nha'
Creating Group 2
Copyright © 2007, 2008 Nortel Networks
.
You can change the VLAN mappings when you add or modify
the network access devices (see
access devices " (page
you add the network access devices to the domain.
The components created by the wizard depend on the selections
you made in the preceding steps. For example, the sample
output illustrates the following options:
•
an existing certificate (Certificate 1) is being used
•
no network access devices is being added
•
the test user is being created

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100 03.01 Standard
28 July 2008
"Configuring the network
64)). You specify the Red VLAN when
--End--