Nortel Secure Network Access Switch; Using The Command Line Interface - Nortel 325 series Cli Manual

122 Configuring the domain
Table 20
Standard DHCP subnet type (cont'd.)
address
netmask
settings
ena
dis
del
Managing local DHCP leases
The following commands are provided for managing DHCP leases:
Table 21
Managing local DHCP leases
/info/dhcp/
list <list>
<del> <stats>
/info/dhcp/
list/ <addr>
<subnet> <all>
/info/dhcp/
del/ <addr>
<subnet> <all>
Copyright © 2007, 2008 Nortel Networks
.
the current network address of the subnet and prompts you to change or
reenter the address.
the current network mask of the subnet and prompts you to change or
reenter the network mask.
See "DHCP Settings menu" (page
Enables the subnet.
Disables the subnet.
Deletes the subnet.
Use list to list current DHCP leases. See below.
Use del to delete current DHCP leases. See below.
Use stats to display information on all leases. The tabulated display has
these columns:
Dom (domain); Snet (Subnet number); Type (Standard, Filter, Hub); Network
(subnet address); Total (total number of leases); and the total number of
leases in each zone (Red, Green, Yellow, Unknown, Known).
Use addr together with an IP address or a MAC address to list the DHCP
lease for the address.
Use subnet together with a subnet address and mask to list DHCP leases
for the subnet.
Use all to list all DHCP leases.
Use addr together with an IP address or a MAC address to delete the
DHCP lease for the address.
Use subnet together with a subnet address and mask to delete DHCP
leases for the subnet.
Use all to delete all DHCP leases.

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100 03.01 Standard
28 July 2008
117).