Table of Contents
Advertisement
Managing user groups
All users must belong to at least one group. Only an administrator user
can add a new user account to the system, but any user can grant an
existing user membership in a group to which the granting user belongs.
By default, the administrator user is a member of all three built-in groups
(admin, oper, certadmin) and can therefore add a new user to any of
these groups. However, a certificate administrator, who is a member of
the certadmin group only, can add an existing user to the certadmin group
only.
If a user belongs to only one group and you want to change the user's
group membership, add the user to the new group first, and then remove
the user from the old one.
If a user belongs to several groups, the first group, according to CLI
numbering, determines the enforcement filters and VLANs that are applied.
To set or change a user's group assignment, access the Groups menu by
using the following command:
/cfg/sys/user/edit <username> /groups
The Groups menu appears.
The Groups menu includes the following options:
Table 49
Managing user groups
/cfg/sys/user/edit <username> /groups
followed by:
list
del <group index>
add admin|oper|certadm
in
Copyright © 2007, 2008 Nortel Networks
.
Lists all groups to which the user is currently
assigned, by group index number.
Removes the user from the specified group.
•
You must have administrator rights in order to
remove other users from groups.
Assigns the user to one of the built-in groups
(admin, oper, certadmin).
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Managing system users and groups 217
group index is an integer indicating the
group index number
Advertisement
Table of Contents
