Table of Contents
Advertisement
144 Configuration of Microsoft NAP Interoperability
cfg/domain/nap/shvs
followed by:
insert <index
number> <vendor
ID> <component ID>
<module name>
move <index number>
<new index number>
Configuration of Windows System Health Validator
To create the windows system health validator, use the following
command:
cfg/domain/nap/wshv
The Windows System Health Validators menu includes the following
options:
cfg/domain/nap/wshv
followed by:
firewall
Copyright © 2007, 2008 Nortel Networks
.
Inserts a system health validators at a particular
position in the configuration.
•
index number —the index number you want
the system health validators to have
•
vendor ID—specify the vendor ID you are
adding
•
component ID—specify the component ID..
•
module name—specify the module name.
The index number you specify must be in use. The
index numbers of existing system health validators
with this index number and higher are incremented
by 1.
Moves a system health validators up or down the
list of System Health Validators in the configuration.
•
index number—the original index number of
the system health validators you want to move
•
new index number—the index number
representing the new position of the system
health validators in the list
The index numbers of the remaining entries adjust
accordingly.
Enables or disables the firewall application.
Values: on and off
default: on
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Advertisement
Table of Contents
