Faxserver Function - Oki MC573 Advanced Manual

Item
Forwarding Forwarding Setting
Setting
Forwarding Number
TAD Mode
Tel Priority Mode
CNG Detection
T/F Timer Programming
Soft Ringer Volume
Remote Receive Number
Factory Description
default
setting
OFF Sets whether to enable the fax forwarding
mode.
(NULL) Sets a fax number used for the fax
forwarding mode.
Type 3 Sets an operation type in Tel / Fax Ready
mode.
[Type 3]: A fax signal is detected in
15 seconds from when the answering
machine answers. Normally, use this type.
[Type 1]: A fax signal is detected right after
the answering machine answers, and then
the reception starts. If you have any fax
reception problems, they may be improved if
this type is set.
[Type 2]: A fax signal is detected right after
the answering machine answers. Set this
type if you usually use this machine as a
phone.
OFF Sets when the external telephone and the
machine ring in Tel / Fax Ready mode.
[ON]: The sender is assumed to make a
voice call. The telephone rings early.
OFF Sets whether to determine whether the
sender is sending a fax during the off the
hook condition in Tel / Fax Ready mode.
35 seconds Sets when to start the auto fax reception if
the communication does not start even after
an incoming call arrives in Tel / Fax Ready
mode or Ans / Fax Ready mode.
High Sets a phone ring volume in Tel / Fax Ready
mode.
OFF Sets a remote switch over number.

FaxServer Function

Item
Environmental Settings FaxServer Function
Prefix
Suffix
Text
Default Settings Scan Size
Density
Resolution
Background Removal
Continuous Scan
Preview
Compression Rate
Configure Shortcuts
Security Function Broadcast Destination
Confirm Dial
- 328 -
9. Operating Management/ Specifications
Factory default setting Description
OFF Sets whether to use
scanning to fax server.
(NULL) Sets to prefix code for
scanning to fax server.
@faxserver Sets to suffix code for
scanning to fax server.
OFF Sets whether to add body
text.
A4 or Letter Sets the default scan size.
0 Sets the default density.
Normal Sets the default resolution.
Auto Sets the default setting of
the background removal.
OFF Sets whether to use
Continuous Scan mode by
default.
OFF Sets the preview image of
sending image.
Low Selects the default
compression level.
01: Manual Dial Sets the shortcut button for
02: Speed Dial the [Internet Fax] tab.
03: Group List
04: Tx History
05: Scan Size
ON Sets whether to indicate the
transmission destination
number before starting
broadcast transmission.
OFF Sets whether to reenter the
transmission destination fax
number before sending.