Printing the Fax Communication Results (Transmit Confirmation Report)
The setting at the factory default, the fax communication reports are printed automatically.
1.
Press
(SETTING).
2.
Press
to select [Admin Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press
5.
Press
to select [Fax Setup], and then press
6.
Press
to select [Default Settings], and then press
7.
Press
to select [Transmit Confirmation Report], and then press
8.
Press
to select [ON], and then press
If you do not want to print, set to [OFF].
9.
Press
until the top screen is displayed.
When you send a fax, Transmit Confirmation Report is printed.
(OK).
(OK).
(OK).
(OK).
1032
(OK).
(OK).