Using The Telephone - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

Appendix

Using the Telephone

This section describes how to use an external telephone connected to the machine with the
Fax feature.
Placing a Call
The following describes how to place a call using the external telephone.
To place a call, the following two methods can be used:
Off-hook Dialing
The following describes how to place a call with off-hook dialing.
1
Pick up the receiver of the external telephone.
2
Specify the call destination.
16
724
Dialing with the receiver lifted (off-hook dialing)
Dialing with the receiver resting in the cradle (on-hook dialing)
Important
While the machine is in the Power Saver mode, you cannot place a call using the external telephone. To place
a call, press the <Power Saver> button to exit the Power Saver mode.
The call destination can be specified using the numeric keypad, address numbers, or one-
touch buttons. The Address Book cannot be used.
The call destination can be specified also with the keyboard displayed on the screen.
Note
To disconnect the call, select [Close].
If your telephone line is set to touch-tone, [Tone (:)] does not appear.
If you want to send tones (or to use the touch-tone services) while using a pulse line, select [Tone (:)].
Some touch-tone services may not be available even if you set your telephone to send tones.