Step 3 Configuring Fax Environment - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

Using IP Fax (SIP)
4
Select [Close].
5
Print a configuration report to confirm that the port is enabled and TCP/IP setting is set up
correctly.

Step 3 Configuring Fax Environment

This section describes the configuration procedures of the Fax feature related to IP fax
(SIP) on the machine.
1
Display the [Tools] screen.
1) Press the <Log In/Out> button.
2) Enter the system administrator's user ID with the numeric keypad or the keyboard
3) Select [Tools] on the Services Home screen.
2
Set items displayed on the [Fax/Internet Fax] screen.
10
1) Select [Fax Service Settings].
2) Select [Screen Defaults].
3) Configure the required settings, and then select [Save].
3
Set the default settings of the Fax feature.
1) Select [Fax Defaults].
2) Configure the required settings, and then select [Save].
4
Configure the settings related to fax control.
1) Select [Fax Control].
370
Note
Rebooting the machine may be required depending on the settings. When a message displayed on the
screen, follow the message and reboot the machine.
Note
For information on how to print a settings list, refer to "Print Reports" (P.95).
Reference
You can configure the settings using CentreWare Internet Services. For information on how to use CentreWare Internet Services,
refer to "Configuring Machine Settings Using CentreWare Internet Services" (P.313).
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's
passcode, and select [Enter].
Note
The default user ID is "11111".
The default passcode is "x-admin".
Reference
For information on the screen default, refer to "Screen Defaults" (P.222).
Reference
For information on the fax default, refer to "Fax Defaults" (P.223).