Table of Contents
Advertisement
Set Telephone Line
Compatibility for
Interference and VoIP
Systems
Problems sending and receiving faxes due to
possible interference on the telephone line
may be solved by lowering the modem speed
to minimize errors in fax transmission. If you
are using a Voice over IP (VoIP) service, Fuji
Xerox recommends changing the compatibility
to Basic (for VoIP).
• VoIP is a type of phone system that
uses an Internet connection, rather
than a traditional phone line.
• Fuji Xerox does not recommend the
use of a VoIP line. VoIP limitations in
general can cause some functions of
the fax machine not to work correctly.
1
Press
(Settings) > All
Settings > Initial Setup >
Compatibility.
2
Press High, Normal or Basic (for
VoIP).
Option
Description
High
Select High to set the
modem speed at 33600
bps.
Normal
Select Normal to set the
modem speed at 14400
bps.
Basic
Select Basic (for
(for
VoIP) to reduce the
VoIP)
modem speed to 9600 bps
and turn off Error
Correction Mode (ECM).
Unless interference is a
recurring problem on your
telephone line, you may
prefer to use it only when
needed.
Option
Description
To improve compatibility
with most VoIP services,
Fuji Xerox recommends
changing the compatibility
setting to Basic (for
VoIP).
3
Press
.
Related Information
• Fax and Telephone Problems on page 44
Receive Modes
Some receive modes answer automatically
(Fax Only Mode and Fax/Tel Mode). You may
want to change the Ring Delay before using
these modes.
Fax Only Mode
(Fax or Fax only in the Machine's Menu)
Fax Only Mode automatically answers
every call as a fax.
Fax/Tel Mode
(Fax/Tel in the Machine's Menu)
Fax/Tel Mode helps you manage incoming
calls, by recognising whether they are fax
or voice calls and handling them in one of
the following ways:
• Faxes will be received automatically.
• Voice calls will start the F/T ring to tell
you to pick up the call. The F/T ring is a
fast pseudo/double-ring made by your
machine.
29
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
