Table of Contents
Advertisement
Tools
Maintenance
You can initialize or delete data from the hard disk of the machine.
EP Diagnostic Request/Repair Request
When the EP system via the Internet is used, the machine contacts our Customer Support
Center if a check or maintenance is required. Our service representative visits your place as
required.
Note
Reference
Check EP Connection
This feature is used to check whether or not the communications between the machine and
our Customer Support Center function normally when the EP system via the Internet is
used.
Note
Reference
5
EP Registration
BB Registration
Select [BB Registration] and then select [Start] to register the machine in EP system.
EPA Server Registration
After the BB registration, [EPA Server Registration] is automatically selected in accordance
with your environment. When this feature is selected, enter the destination server IP of your
EPA server and then select [Start] to register the machine in the EPA server.
Initialize Hard Disk
Initializes the hard disk.
Data deleted by initialization includes supplementary fonts, ESC/P, and HP-GL/2 forms.
Note
Delete All Data
This feature is designed to prevent the leakage of confidential information of a customer
when the machine is returned to Fuji Xerox. All data stored on the machine will be deleted.
Before executing the operation, make sure that the operation is absolutely necessary.
Important
144
The EP system is not available in some region. For more information, contact our Customer Support Center.
For more information on the EP system, refer to "EP System" (P.730).
The EP system is not available in some region. For more information, contact our Customer Support Center.
For more information on the EP system, refer to "EP System" (P.730).
The secure print documents and logs are not erased.
It takes several minutes to several hours to delete all data. (The time taken depends on the machine
configuration or the hard disk capacity.)
Advertisement
Table of Contents
