Setting The Screen After Auto Clear - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

Setting the Screen After Auto Clear

You can select the screen to be displayed after Auto Clear from [Last Selection Screen] or
[Services Home].
Reference
For information on Auto Clear, refer to "Auto Clear" (P.128)"
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
Note
The default user ID is "11111".
The default passcode is "x-admin".
3
Select [Tools] on the Services Home screen.
Note
When the Services Home screen is not displayed on the touch screen, press the <Services Home> button.
1 2 3
4 5 6
7 8 9
0 ＃
C
Customizing the Control Panel
31
1