Step 3 Configuration On The Computer; Centreware Internet Services Setting Items - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

3
Configure [Print Mode] or [Auto Eject Time] as necessary.
Reference
For information on the setting items, refer to "USB" (P.172).
4
Select [Close] repeatedly until the [Tools] screen is displayed.
5
Select [Close].
Note
Rebooting the machine may be required depending on the settings. When a message displayed on the
screen, follow the message and reboot the machine.
6
Print a configuration report to confirm that the USB port is enabled.
Reference
For information on how to print a configuration report, refer to Printer Reports(P.97).

Step 3 Configuration on the Computer

To print from the machine, you need to install a print driver on your computer.
Reference
For information on the supported operating systems, refer to "Supported Operating Systems" (P.319).
Note
For Mac OS X 10.5/10.6, Mac OS X 10.7 Lion, and OS X 10.8 Mountain Lion, OS X 10.9 Mavericks and OS X
10.10 Yosemite, you can use USB without the Adobe PostScript 3 Kit (optional) if you install the print driver
for Mac OS X contained in the media provided with the driver.
For information on the installation procedures of Adobe PostScript 3 Kit (optional), refer to the manual
contained in the CD-ROM provided with the Adobe PostScript 3 Kit (optional).

CentreWare Internet Services Setting Items

You can configure the following setting items using CentreWare Internet Services:
Reference
For details on the setting items, click [Help] at the upper right corner of the CentreWare Internet Services screen to see help.
Important
To display the online help for CentreWare Internet Services, users need to have the environment to connect
to the internet. The communication fee shall be borne by you.
Reference
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet Services" (P.312).
Receiving buffer size for the USB interface
([Properties] > [General Setup] > [Memory Settings] > [USB])
Port Settings
Bi-directional Communication
Auto Eject Time
Adobe Communication Protocol
Note
The Adobe Communication Protocol can be configured when the Adobe PostScript 3 Kit (optional) is
installed.
Installation When Using USB Port
7
321