Fax Control - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

Internet Fax Profile
Set the default value for [Internet Fax Profile] in the [Fax/Internet Fax Options] screen.
Internet Fax Subject
Set the default value for [Internet Fax Subject] in the [Fax/Internet Fax Options] screen. Up
to 128 single-byte characters can be entered for the subject.
Internet Fax Encryption
Set the default value for [Encryption] in the [Fax/Internet Fax Options] screen.
Note
This feature appears only when the root certificate for a remote server for remote authentication (except for
ApeosWare Authentication Management or Authentication Agent) is set.

Fax Control

You can configure the settings related to fax control.
Extension
To set which port to use when you send a fax to an extension.
Note
This feature may not be available depending on the model or your machine configuration. For more
information, contact our Customer Support Center.
Re-enter Recipients
Set whether to re-enter the recipient after once specifying the recipient, to reduce the risk
of sending a fax, an IP fax, or an Internet fax to the wrong address. When Re-enter
Recipients is set to [Enter Twice], if you specify the recipient by entering the phone number,
or by selecting from the Address Book, the screen prompting you to re-enter the recipient
appears. If the same recipient has been entered, the transmission process will start.
Re-enter Broadcast Recipients
This setting is required when you selected [Enter Twice] for [Re-enter Recipients]. Set
whether or not to allow the Broadcast Send.
Enter Once Only
Allows the Broadcast Send. No need to re-enter the recipient.
Enter Twice
Allows the Broadcast Send. Re-entering the recipient is required.
Broadcast Disabled
No Broadcast Send is allowed.
Re-enter Speed Dial Recipients
This setting is required when you selected [Enter Twice] for [Re-enter Recipients]. Select
how to re-enter a recipient after the first entry.
Fax Service Settings
5
225