Table of Contents
Advertisement
Single stapling or dual stapling
Punch
Paper Size:A3, 11 x 17", B4, A4, A4 , 8.5 x 11", 8.5 x 11" , B5
Number of Holes:2/4 holes, or 2/3 holes (US Specifications)
Paper Weight:60 to 200 gsm
Note
The Punch function requires the optional Finisher-B1 Punch unit for 2-hole / 4-hole punch or Finisher-B1
Punch unit for 2-hole / 3-hole punch (US Specifications).
Booklet Finishing
Capacity:
Saddle Staple: 15 sheets; Scoring: 5 sheets
Paper Size:
Maximum: A3, 11 x 17"
Minimum: A4, 8.5 x 11"
Paper Weight
Saddle Staple : 64 to 80 gsm, Scoring : 64 to 105 gsm
Note
The Booklet Finishing function requires the optional Finisher-B1 Booklet unit. After a job with the Booklet
Finishing function specified has been output, the next job may not be delivered until the sheets are removed
from the output tray. Also, if larger size sheets are stacked on top of smaller size sheets after a job with the
Booklet Finishing function specified has been run, the next job may not be delivered until the sheets are
removed from the output tray.
Dimensions/Weight
Width 657 x Depth 552 x Height 1,010 mm, 28 kg
Width 657 x Depth 597 x Height 1,080 mm, 37 kg (When the Booklet Maker Unit is
attached)
Note
The values do not include the finisher transport area located within the main unit.
Space Requirement (when connected to the main unit)
Width 1,573 X Depth 659 mm
With Booklet Finisher: W 1,573 x D 670 mm
Main Unit + Finisher-B1; when the paper support is pulled out and the Bypass tray is fully
extended.
Side Tray (optional)
Paper Size/Paper Weight
Same as the Basic Specifications / Copy Function
60 to 256 gsm
Specifications
16
629
Advertisement
Table of Contents
