Cleaning The Document Cover And Document Glass - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

Maintenance
1
Wipe only the LCD area with a soft cloth moistened with neutral detergent or alcohol.
Important
3

Cleaning the Document Cover and Document Glass

If the document cover and document glass are dirty, streaks or smears may appear on
copies, faxes, or scanned documents and the machine may not properly detect document
sizes.
To ensure clean copies at all times, clean the document cover and the document glass
about once a month.
Important
1
Wipe the document cover with a soft cloth moistened with water to remove any dirt, and
then wipe it with a soft, dry cloth.
Important
Note
84
When you moisten the cloth with neutral detergent or alcohol, do not allow the excess liquid to drip down
from the cloth. If the cloth is moistened with the excess liquid, wring the cloth gently before wiping the LCD
area.
Do not use any volatile liquids on the machine such as benzene and paint thinner, or insect repellent as these
may discolor, deform, or crack the machine exterior.
Cleaning the touch screen with an excessive force may cause the screen to be damaged. Wipe the screen
gently.
Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint or coating on
plastic parts.
Cleaning the machine with an excessive amount of water may cause the machine to malfunction or damage
documents during copying, faxing, or scanning.
Do not use cleaning agents other than water or neutral detergent.
If you cannot remove dirt easily, gently wipe the document cover with a soft cloth moistened with a small
amount of neutral detergent.