Replacing Staple Cartridge (For Finisher-B1) - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

Maintenance

Replacing Staple Cartridge (for Finisher-B1)

When the optional Finisher-B1 is installed and the staple cartridge needs to be replaced, a
message appears on the touch screen. When this message appears, load a new staple case
into the staple cartridge.
Important
Note
1
Make sure that the machine is not operating, and open the finisher front cover.
3
2
Grasp the handle and pull out the staple cartridge holder to the right, towards you.
3
Take the staple cartridge out of the finisher.
Note
76
The use of staple cartridges not recommended by Fuji Xerox may degrade quality and performance. Use only
staple cartridges recommended by Fuji Xerox.
When the machine is in Power Saver mode, exit Power Saver mode by pressing the <Power Server> button
and the <Machine Status> button on the control panel before you replace the staple cartridge.
When replacing the staple cartridge, press the <Machine Status> button and check the current status for the
staple cartridge even when the control panel is lit.
To order a staple cartridge, contact our Customer Support Center.
The staple cartridge is firmly inserted. A slight force is required to pull the cartridge out of the finisher.