Table of Contents
Advertisement
Appendix
* : Based on when larger size paper is stacked on paper.
Dimensions/Weight
Width 559 x Depth 448 x Height 246 mm, 12 kg
Space Requirement (when connected to the main unit)
Width 1,036 X Depth 659 mm (main unit + Finisher-A1, when the extension tray and the
bypass tray are fully extended)
Finisher-B1 (Optional)
Type
Sorting (Offset available)/ Stacking (Offset available)
Paper Size/Paper Weight
* : Paper smaller than B5 is delivered to the center tray.
Paper Capacity
Finisher tray
*1 : When larger size sheets are stacked on top of smaller size sheets.
*2 : The Booklet Finishing function requires the optional Finisher-B1 Booklet unit. After a job with the Booklet Finishing function
Staple
16
628
30 sheets
Important
When using 80 gsm paper
Maximum: A3, 11 x 17"
*
Minimum: B5
60 to 220 gsm
For paper not stapled:
A4: 2000 sheets, B4 or larger: 1,000 sheets, Mixed stack
For paper stapled:
A4: 100 sets or 1000 sheets, B4 or larger: 75 sets or 750 sheets
Center binding/folding
*2
Folding
: 500 sheets
specified has been output, the next job may not be delivered until the sheets are removed from the output tray. Also, if larger
size sheets are stacked on top of smaller size sheets after a job with the Booklet Finishing function specified has been run, the
next job may not be delivered until the sheets are removed from the output tray.
Note
When using 80 gsm paper
Capacity:
A4: 50 sheets (90 gsm or less)
Paper Size:
Maximum: A3, 11 X 17"
Minimum:B5
Position:
*2
: 50 sets or 600 sheets
*1
: 300 sheets
Advertisement
Table of Contents
