Fax Billing Data - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

Hide
As you enter the Account ID, the character string is hidden as a row of asterisks (*****).
Display Billing Information Upon Login
You can set whether to display billing information per user when a user logs in.If you select
[Enabled], users can check their billing information: [Impressions], [Account Limit], and
[Balance] for each of the services (copying, printing, and scanning).
Note
This item is displayed when [Login to Local Accounts] is selected in [Login Type] and [Local Accounting] is
selected in [Accounting Type].
Only the billing information for the services that the user is allowed to use will be displayed.
When a user logs in as the system administrator, billing information will not be displayed.

Fax Billing Data

You can configure fax billing settings.
Important
To register the billing data, enable the Auditron feature for fax/Internet fax under Accounting in advance. For
details on how to enable the Auditron feature, refer to "Auditron Mode" (P.289).
Note
Set the connection time for one unit charge in each of the time bands (daytime/night/ midnight) in [Billing].
For more information on how to set [Billing], refer to "Billing - Day Time, Billing - Night Time, Billing -
Midnight" (P.280).
The registered details can be confirmed by printing the Billing Data List. For information on how to print, refer
to "Billing Data List" (P.102).
1
Select [Fax Billing Data].
2
Select [Charge Rate per Unit].
Charge Rate per Unit
This is a communication charge per unit. You can set a value from 0.1 to 255.9 seconds in
0.1 second increments.
3
Select [Change Settings].
Accounting
5
291