Configuration For Account Administration; Step 1 Selecting An Accounting Type; Step 2 Registering User Information - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

Authentication and Accounting Features

Configuration for Account Administration

This section describes the settings to use the accounting feature on the machine.
"Step 1 Selecting an Accounting Type" (P.434)
"Step 2 Registering User Information" (P.434)

Step 1 Selecting an Accounting Type

The following describes the configuration procedures to use the accounting feature.
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
3
Select [Tools] on the Services Home screen.
4
Select [Accounting].
5
Select [Accounting Type].
6
Select an accounting type, and then select [Save].
7
Select [Close] repeatedly until the [Tools] screen is displayed.
8
Select [Close].
14

Step 2 Registering User Information

1
Press the <Log In/Out> button.
434
Reference
For information on relationships between the authentication and accounting modes, refer to "Authentication and Accounting
Relationship" (P.415).
Note
The default user ID is "11111".
The default passcode is "x-admin".
Note
You can select the accounting type from [Local Accounting], [Network Accounting], and [Xerox Standard
Accounting].