Step 3 Configuring Remote Authentication - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

6
Print a configuration report to confirm that the SMB Client port is enabled and that TCP/IP
is set up correctly.
Reference
For information on how to print a configuration report, refer to "Print Reports" (P.95).

Step 3 Configuring Remote Authentication

Set the Login Type to Login to Remote Accounts.
Note
You can configure the settings using CentreWare Internet Services. For information on how to use
CentreWare Internet Services, refer to "Configuring Machine Settings Using CentreWare Internet Services"
(P.313).
1
Display the [Tools] screen.
1) Press the <Log In/Out> button.
2) Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
Note
The default user ID is "11111".
The default passcode is "x-admin".
3) Select [Tools] on the Services Home screen.
2
Set the Login Type to Login to Remote Accounts.
1) Select [Authentication/Security Settings].
2) Select [Authentication].
3) Select [Login Type].
4) Select [Login to Remote Accounts], and then select [Save].
5) Select [Close].
6) Select [Close] repeatedly until the [Tools] screen is displayed.
3
Configure a remote authentication server to use.
Note
You can select from [Kerberos (Windows 2000)], [Kerberos (Solaris)], [LDAP], [SMB], and [Authentication
Agent].
Reference
For information on the remote authentication server settings, refer to Authentication System Setup(P.191).
1) Select [System Settings].
2) Select [Connectivity & Network Setup].
3) Select [Remote Authentication/Directory Service].
4) Select [Authentication System Setup].
Configuration of Scan to My Folder
9
351