Output Feature; Esc/P-K Emulation Print Features; Esc/P-K Emulation Settings - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

Appendix

Output Feature

This section describes the machine's output feature.
Outputting a Pending Print Job
The printing of jobs already received by the machine can be prioritized over other jobs.

ESC/P-K Emulation Print Features

Pages per Side
The Pages per Side feature reduces the size of multiple-sheet documents and prints them
on a single sheet of paper.
The Pages per Side feature can be used in the ESC/P-K emulation mode. In the ESC/P-K
mode, 2 Up can be used.
Form Overlay
In the ESC/P-K mode, you can register an original form on the machine, and overprint the
form on a printout.
The form to be used for overlaying can be specified on the control panel.
Forms
You can use ESC/P-K to register forms on the machine. Up to 64 forms can be registered.

ESC/P-K Emulation Settings

The following tables show the basic and extended settings that can be configured onthe
ESC/P-K emulation mode menu.
Basic Settings
The following tables show the basic and extended settings that can be configured onthe
ESC/P-K emulation mode menu.
16
640
Reference
For information on prioritizing the printing of jobs already received by the machine, refer to "Job Status" > "Printing Pending Jobs"
in the User Guide.
Reference
For more information on registering forms, contact our Customer Support Center.
Reference
For more information on registering forms, contact our Customer Support Center.