Creating An Authorization Group - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

Authentication and Accounting Features
3
Select [Tools] on the Services Home screen.
4
Select [Authentication/Security Settings].
5
Select [Authentication].
6
Select [Create Authorization Groups].
7
Select the group displayed as [DefaultGroup (Default)], and then select [Create/ Delete].
8
Set each item.
9
Select [Close] repeatedly until the [Tools] screen is displayed.
10
Select [Close].

Creating an Authorization Group

Perform the following procedures to add authorization groups, if necessary.
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
3
Select [Tools] on the Services Home screen.
4
Select [Authentication/Security Settings].
5
Select [Authentication].
6
Select [Create Authorization Groups].
14
7
Select a group displayed as [(No Name)], and then select [Create/Delete].
8
Enter a group name into [Group Name].
9
Set the other items.
10
Select [Close] repeatedly until the [Tools] screen is displayed.
430
Reference
For more information on the change of the authorization group, refer to "Create Authorization Groups" (P.298).
Note
The default user ID is "11111".
The default passcode is "x-admin".
Reference
For more information on the authorization group settings, refer to "Create Authorization Groups" (P.298).