Show Msglog; Show Traplog; Management Commands - NETGEAR GSM7324 Reference Manual

7000 Series L3 Managed Switch Reference Manual for Software v1.0
Code
Time
Note: Event log information is retained across a switch reset.

show msglog

This command displays the message log maintained by the switch. The message log contains
system trace information.
The trap log contains a maximum of 256 entries that wrap.
Format
Message
Note: Message log information is not retained across a switch reset.

show traplog

This command displays the trap log maintained by the switch.
The trap log contains a maximum of 256 entries that wrap.
Format
Number of Traps since last reset
Number of Traps since log last displayed
Log
System Up Time
Trap
Note: Trap log information is not retained across a switch reset.

Management Commands

These commands manage the switch and show current management settings.
7-14
The event code.
The time this event occurred.
show msglog
The message that has been logged.
show traplog
The number of traps that have occurred since the last reset of
this device.
The number of traps that have occurred since the
traps were last displayed. Getting the traps by any method (termi-
nal interface display, Web display, upload file from switch etc.)
will result in this counter being cleared to 0.
The sequence number of this trap.
The relative time since the last reboot of the switch at which this
trap occurred.
The relevant information of this trap.
May 30, 2003 Beta Draft
Switching Commands