Disassembly And Replacement - Toshiba e-STUDIO281c Service Manual

16.7 Disassembly and Replacement

[A] Fuser unit
(1) Take off the IH terminal cover
( P.2-30 "[N] IH terminal cover")
(2) Disconnect 2 connectors and 4 faston termi-
nals.
Notes:
1. Make sure to hold the plastic part of the
faston terminals when disconnecting
them.
2. Make sure not to connect each terminal to
the wrong position.
(3) Remove 2 screws and take off the fuser unit.
[B] Oil roller
(1) Take off the fuser unit
( P.16-19 "[A] Fuser unit").
(2) Open the jam access cover and transport
guide.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
RED BLUE
WHITE
( S ) ( C )
WHITE
Fig. 16-10
Fig. 16-11
Fig. 16-12
16 - 19
Fuser unit
Transport guide
Jam access cover
e-STUDIO281c/351c/451c
FUSER UNIT / PAPER EXIT SECTION
16