Toshiba e-STUDIO281c Service Manual page 167

Hide thumbs Also See for e-STUDIO281c:

Table of Contents

[G] Carriage-1

Take off the original glass, upper rear cover

and front upper cover.

P.6-17 "[A] Original glass",

P.2-32 "[T] Upper rear cover",

P.2-27 "[G] Front upper cover")

Move the carriage and position the holes of

the carriage to the holes of the frame.

Remove 2 screws and take off the brackets

fixing the carriage-1 to the wire.

Remove the square seal fixing the lamp har-

ness to the base. Disconnect the connector

of the lamp harness from the SLG board.

e-STUDIO281c/351c/451c

E-studio351c E-studio451c