(5)
Take off the finisher.
Note:
Be careful not to fell the finisher when mov-
ing only the finisher unit.
[H] MJ-6004 (Hole punch unit)
(1)
Turn OFF the power and unplug the power
cable.
(2)
Take off the connector cover and disconnect
connector.
(3)
Open the front cover of the hole punch unit
and remove 1 screw.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 2-125
Connector cover
Fig. 2-126
Fig. 2-127
2 - 61
06/07
e-STUDIO281c/351c/451c
OUTLINE OF THE MACHINE
2