[E]
Lens unit
(1)
Remove the lens cover (
cover").
(2)
Disconnect 1 connector and remove 5
screws, then take off the lens unit.
Notes:
1. When installing the lens unit, fix it while
pushing it to the rear direction.
2. For adjustment, refer to "3.9.2 Lens Unit"
in the Service Handbook.
3. Do not touch 6 screws shown with the
arrows when replacing the lens unit.
4. Handle the unit with care. Do not touch
the adjusted area and lens. (Hold the unit
as the right figure.)
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
P.6-17 "[B] Lens
Lens unit
6 - 21
Fig. 6-28
Fig. 6-29
Fig. 6-30
e-STUDIO281c/351c/451c
SCANNER
6