Toshiba e-STUDIO281c Service Manual page 243

[H] Lower drawer feed sensor (S24)
(1) Take off the paper feed guide assembly (
P.10-27 "[F] Paper feed guide assembly").
(2) Remove the sticker and disconnect 1 con-
nector. Release 2 latches and take off the
lower drawer feed sensor.
[I] Side cover opening/closing switch (S44)
(1) Take off the paper feed guide assembly (
P.10-27 "[F] Paper feed guide assembly").
(2) Disconnect 1 connector, release 2 latches,
and take off the side cover opening/closing
switch.
[J] Upper drawer feed sensor (S23)
(1) Take off the registration guide (
"[G] Registration guide").
(2) Remove 1 screw and take off the bracket.
(3) Remove the sticker and disconnect 1 con-
nector. Release 2 latches and take off the
upper drawer feed sensor.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Sticker
Side cover opening/closing switch
P.10-28
10 - 29
Lower drawer feed sensor
Connector
Fig. 10-65
Connector
Fig. 10-66
Connector
Upper drawer feed sensor
Fig. 10-67
e-STUDIO281c/351c/451c
PAPER FEEDING SYSTEM
10