Toshiba e-STUDIO281c Service Manual page 78

(8) Take off the finisher.
Note:
Be careful not to fell the finisher when mov-
ing the finisher unit only.
[F] MJ-1024 (Console finisher)
(1) Turn OFF the power and unplug the power
cable.
(2) Take off the connector cover and disconnect
the connector.
(3) Open the finisher front cover and remove 1
screw.
e-STUDIO281c/351c/451c
OUTLINE OF THE MACHINE
Connector cover
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
2 - 58
Fig. 2-116
Fig. 2-117
Fig. 2-118