Toshiba e-STUDIO281c Service Manual page 270

Hide thumbs Also See for e-STUDIO281c:

Table of Contents

[R] Ozone exhaust fan (M18)

Take off the ozone filter

P.11-23 "[Q] Ozone filter").

Take off the right upper cover

P.2-28 "[H] Right upper cover").

Take off the right rear hinge cover

P.2-31 "[P] Right rear hinge cover").

Take off the IH terminal cover

P.2-30 "[N] IH terminal cover").

Take off the right rear cover

P.2-30 "[O] Right rear cover").

Take off the rear cove-2

P.2-32 "[S] Rear cover-2").

Take off the SYS board case.

P.2-35 "[D] SYS board case")

Take off the flywheel.

P.9-9 "[A] Developer motor drive unit")

Disconnect 1 connector and remove 3

screws. Then take off the ozone exhaust fan

with its duct.

(10) Release 6 latches and take off the duct.

Then take out the ozone exhaust fan.

e-STUDIO281c/351c/451c

DRUM RELATED SECTION

Ozone exhaust fan

E-studio351c E-studio451c