(3)
Remove 2 screws and take off the rear
cover-1.
(4)
Remove 3 screws and take off the rear
cover-2.
Note:
Disconnect the connectors of the RADF first
when the RADF is installed.
(5)
Remove 1 screw and the ground wire, and
then disconnect 2 connectors (3 if the
optional damp heater is installed).
e-STUDIO281c/351c/451c
OUTLINE OF THE MACHINE
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
2 - 50
Rear cover-1
Fig. 2-92
Rear cover-2
Fig. 2-93
Fig. 2-94