Toshiba e-STUDIO281c Service Manual page 370

(5) Remove 2 screws and take off the separation
finger unit.
(6) Remove the spring and separation finger.
[H] Pressure roller
(1) Take off the fuser belt unit
( P.16-25 "[F] Fuser belt").
(2) Take off the separation finger unit
( P.16-27 "[G] Separation finger").
(3) Take off the pressure roller.
e-STUDIO281c/351c/451c
FUSER UNIT / PAPER EXIT SECTION
Separation finger unit
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
16 - 28
Fig. 16-37
Separation finger
Fig. 16-38
Pressure roller
Fig. 16-39