Toshiba e-STUDIO281c Service Manual page 54

[B] Hard disk (HDD)
(1) Take off the rear cover-1 (
Rear cover-1").
(2) Take off the SYS board cover (
HDD cooling fan (M21)").
(3) Disconnect 2 connectors.
(4) Remove 1 screw and the ground wire.
Remove 4 screws and take off the hard disk.
[C] SYS board (SYS)
(1) Take off the SYS board cover (
HDD cooling fan (M21)").
(2) Disconnect 2 connectors, remove 2 screws,
and then take off the hard disk with the stay.
e-STUDIO281c/351c/451c
OUTLINE OF THE MACHINE
P.2-31 "[R]
P.2-33 "[A]
P.2-33 "[A]
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
2 - 34
Fig. 2-46
Hard disk
Fig. 2-47
Hard disk
Fig. 2-48